![]() ![]() The second value provides the percentage that can be entered into a copier - a value larger than 100 will make the drawing larger and a value less than 100 will make the drawing smaller. If you do want to scale the objects by reference, enter and the selected objects. This leaves the selected objects unscaled. The first and second point pairs move and rotate the selected objects by reference. ![]() The first value provides the decimal change. The following steps move and rotate a 'L-shaped' bracket to the intersection of a column and beam. Simply select the scale of your original drawing and select the scale you would like the drawing to be. ![]() The drawing must get (way) larger, so 360 divided by 24 = 15x or 1500% Scale Conversion Calculatorīelow, you will find a simple calculator to help with this calculation. Likewise, if you have a drawing at 1" = 30'-0" and you want to change it to 1/2" = 1'-0": The drawing must get smaller, so 64 divided by 480 =. The scale factor is used to compare the scales to each other.įor instance, if you have a drawing at 3/16" = 1'-0" and you want to change it to 1" = 40'-0", you simply compare the two scale factors and adjust as required: The trick is to use the Scale Factor, which appears in our CAD Scale Factors article. Changing from one scale to another seems like a complex task, especially if you need to convert from an architectural scale to an engineering scale. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |